Phenylephrine Hydrochloride description, usages, side effects, indications, overdosage, supplying and lots more!

Menu
Search

Phenylephrine Hydrochloride

West-ward Pharmaceutical Corp.

CONTAINS NO ANTIMICROBIAL PRESERVATIVE




FULL PRESCRIBING INFORMATION

WARNING: Physicians should completely familiarize themselves with the complete contents of this insert before prescribing Phenylephrine Hydrochloride Injection, USP.

Phenylephrine hydrochloride is a vasoconstrictor and pressor drug chemically related to epinephrine and ephedrine. Phenylephrine hydrochloride is a synthetic sympathomimetic agent in sterile form for parenteral injection. Chemically, phenylephrine hydrochloride is (-)-m-Hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride, and has the following structural formula:

Phenylephrine Hydrochloride

Each mL contains: Phenylephrine Hydrochloride 10 mg; Sodium Chloride 3.5 mg; Sodium Citrate Dihydrate 4 mg; Citric Acid Monohydrate 1 mg; Sodium Metabisulfite 2 mg; Water for Injection q.s. pH adjusted with Sodium Hydroxide and/or Hydrochloric Acid if necessary. pH 3.0-6.5.

Phenylephrine hydrochloride produces vasoconstriction that lasts longer than that of epinephrine and ephedrine. Responses are more sustained than those to epinephrine, lasting 20 minutes after intravenous and as long as 50 minutes after subcutaneous injection. Its action on the heart contrasts sharply with that of epinephrine and ephedrine, in that it slows the heart rate and increases the stroke output, producing no disturbance in the rhythm of the pulse.

Phenylephrine is a powerful postsynaptic alpha-receptor stimulant with little effect on the beta receptors of the heart. In therapeutic doses, it produces little if any stimulation of either the spinal cord or cerebrum. A singular advantage of this drug is the fact that repeated injections produce comparable effects.

The predominant actions of phenylephrine are on the cardiovascular system. Parenteral administration causes a rise in systolic and diastolic pressures in man and other species. Accompanying the pressor response to phenylephrine is a marked reflex bradycardia that can be blocked by atropine; after atropine, large doses of the drug increase the heart rate only slightly. In man, cardiac output is slightly decreased and peripheral resistance is considerably increased. Circulation time is slightly prolonged, and venous pressure is slightly increased; venous constriction is not marked. Most vascular beds are constricted; renal splanchnic, cutaneous and limb blood flows are reduced but coronary blood flow is increased. Pulmonary vessels are constricted, and pulmonary arterial pressure is raised.
The drug is a powerful vasoconstrictor with properties very similar to those of norepinephrine but almost completely lacking the chronotropic and inotropic actions on the heart. Cardiac irregularities are seen only very rarely even with large doses.

Phenylephrine Hydrochloride Injection is intended for the maintenance of an adequate level of blood pressure during spinal and inhalation anesthesia and for the treatment of vascular failure in shock, shock-like states and drug induced hypotension or hypersensitivity. It is also employed to overcome paroxysmal supraventricular tachycardia, to prolong spinal anesthesia and as a vasoconstrictor in regional analgesia.

Phenylephrine Hydrochloride Injection should not be used in patients with severe hypertension, ventricular tachycardia or in patients who are hypersensitive to it or to any of the components.

If used in conjunction with oxytocic drugs, the pressor effect of sympathomimetic pressor amines is potentiated (see PRECAUTIONS, Drug Interactions). The obstetrician should be warned that some oxytocic drugs may cause severe persistent hypertension and that even a rupture of a cerebral blood vessel may occur during the postpartum period.

This product contains sodium metabisulfite, a sulfite that may cause allergic-type reactions including anaphylactic symptoms and life-threatening or less severe asthmatic episodes in certain susceptible people. The overall prevalence of sulfite sensitivity in the general population is unknown and probably low. Sulfite sensitivity is seen more frequently in asthmatic than in nonasthmatic people.

Phenylephrine hydrochloride should be employed only with extreme caution in elderly patients or in patients with hyperthyroidism, bradycardia, partial heart block, myocardial disease or severe arteriosclerosis.

Vasopressors, particularly metaraminol, may cause serious cardiac arrhythmias during halothane anesthesia and therefore should be used only with great caution or not at all.

The pressor effect of sympathomimetic pressor amines is markedly potentiated in patients receiving monoamine oxidase inhibitors (MAOI). Therefore, when initiating pressor therapy in these patients, the initial dose should be small and used with due caution. The pressor response of adrenergic agents may also be potentiated by tricyclic antidepressants.

No long-term animal studies have been done to evaluate the potential of phenylephrine in these areas.

Animal reproduction studies have not been conducted with phenylephrine. It is also not known whether phenylephrine can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Phenylephrine should be given to a pregnant woman only if clearly needed.

If vasopressor drugs are either used to correct hypotension or added to the local anesthetic solution, the obstetrician should be cautioned that some oxytocic drugs may cause severe persistent hypertension and that even a rupture of a cerebral blood vessel may occur during the postpartum period (see WARNINGS).

It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when phenylephrine hydrochloride is administered to a nursing woman.

To combat hypotension during spinal anesthesia in children, a dose of 0.5 mg to 1 mg per 25 pounds of body weight, administered subcutaneously or intramuscularly, is recommended.

Headache, reflex bradycardia, excitability, restlessness and rarely arrhythmias.

Overdosage may induce ventricular extrasystole and short paroxysms of ventricular tachycardia, a sensation of fullness in the head and tingling of the extremities.

Should an excessive elevation of blood pressure occur, it may be immediately relieved by an α-adrenergic blocking agent (e.g. phentolamine).

The oral LD50 in the rat is 350 mg/kg, in the mouse 120 mg/kg.

Phenylephrine Hydrochloride Injection is generally injected subcutaneously, intramuscularly, slowly intravenously or in dilute solution as a continuous intravenous infusion. In patients with paroxysmal supraventricular tachycardia and, if indicated, in case of emergency, Phenylephrine Hydrochloride Injection is administered directly intravenously. The dose should be adjusted according to the pressor response.

DOSAGE CALCULATIONS
  Dose Required    Use Phenylephrine Hydrochloride Injection 1%
 10 mg  1 mL
 5 mg  0.5 mL
 1 mg  0.1 mL


For convenience in intermittent intravenous administration, dilute 1 mL Phenylephrine Hydrochloride Injection 1% with 9 mL Sterile Water for Injection, USP, to yield 0.1% Phenylephrine Hydrochloride Injection.

  Dose Required   Use Diluted Phenylephrine Hydrochloride Injection (0.1%)
 0.1 mg  0.1 mL
 0.2 mg  0.2 mL
 0.5 mg  0.5 mL

SUBCUTANEOUSLY OR INTRAMUSCULARLY: Usual dose, from 2 mg to 5 mg. Range, from 1 mg to 10 mg. Initial dose should not exceed 5 mg.
INTRAVENOUSLY: Usual dose, 0.2 mg. Range, from 0.1 mg to 0.5 mg. Initial dose should not exceed 0.5 mg.
Injections should not be repeated more often than every 10 to 15 minutes. A 5 mg intramuscular dose should raise blood pressure for one to two hours. A 0.5 mg intravenous dose should elevate the blood pressure for about 15 minutes.

Blood volume depletion should always be corrected as fully as possible before any vasopressor is administered. When, as an emergency measure, intraaortic pressures must be maintained to prevent cerebral or coronary artery ischemia, phenylephrine can be administered before and concurrently with blood volume replacement.

Hypotension and occasionally severe shock may result from overdosage or idiosyncrasy following the administration of certain drugs, especially adrenergic and ganglionic blocking agents, rauwolfia and veratrum alkaloids and phenothiazine tranquilizers. Patients who receive a phenothiazine derivative as preoperative medication are especially susceptible to these reactions. As an adjunct in the management of such episodes, Phenylephrine Hydrochloride Injection is a suitable agent for restoring blood pressure.

Higher initial and maintenance doses of phenylephrine are required in patients with persistent or untreated severe hypotension or shock. Hypotension produced by powerful peripheral adrenergic blocking agents, chlorpromazine or pheochromocytomectomy may also require more intensive therapy.

Add 10 mg of the drug (1 mL of 1 percent solution) to 500 mL of Dextrose Injection, USP or Sodium Chloride Injection, USP (providing a 1:50,000 solution). To raise the blood pressure rapidly, start the infusion at about 100 mcg to 180 mcg per minute (based on 20 drops per mL this would be 100 to 180 drops per minute). When the blood pressure is stabilized (at a low normal level for the individual), a maintenance rate of 40 mcg to 60 mcg per minute usually suffices (based on 20 drops per mL this would be 40 to 60 drops per minute). If the drop size of the infusion system varies from the 20 drops per mL the dose must be adjusted accordingly.

If a prompt initial pressor response is not obtained, additional increments of phenylephrine (10 mg or more) are added to the infusion bottle. The rate of flow is then adjusted until the desired blood pressure level is obtained. (In some cases, a more potent vasopressor, such as norepinephrine bitartrate, may be required.) Hypertension should be avoided. The blood pressure should be checked frequently. Headache and/or bradycardia may indicate hypertension. Arrhythmias are rare.

Routine parenteral use of phenylephrine has been recommended for the prophylaxis and treatment of hypotension during spinal anesthesia. It is best administered subcutaneously or intramuscularly three or four minutes before injection of the spinal anesthetic. The total requirement for high anesthetic levels is usually 3 mg, and for lower levels, 2 mg. For hypotensive emergencies during spinal anesthesia, phenylephrine may be injected intravenously, using an initial dose of 0.2 mg. Any subsequent dose should not exceed the previous dose by more than 0.1 mg to 0.2 mg and no more than 0.5 mg should be administered in a single dose.

To combat hypotension during spinal anesthesia in children, a dose of 0.5 mg to 1 mg per 25 pounds body weight, administered subcutaneously or intramuscularly, is recommended.

The addition of 2 mg to 5 mg of phenylephrine hydrochloride to the anesthetic solution increases the duration of motor block by as much as approximately 50 percent without any increase in the incidence of complications such as nausea, vomiting or blood pressure disturbances.

Concentrations about ten times those employed when epinephrine is used as a vasoconstrictor are recommended. The optimum strength is 1:20,000 (made by adding 1 mg of phenylephrine hydrochloride to every 20 mL of local anesthetic solution). Some pressor responses can be expected when 2 mg or more are injected.

Rapid intravenous injection (within 20 to 30 seconds) is recommended. The initial dose should not exceed 0.5 mg, and subsequent doses, which are determined by the initial blood pressure response, should not exceed the preceding dose by more than 0.1 mg to 0.2 mg and should never  exceed 1 mg.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

Phenylephrine Hydrochloride Injection, USP 1% (10 mg/mL) is supplied as follows:
NDC 0641-6088-25
1 mL Single Dose vial packaged in 25s

Store at 20°-25°C (68°-77°F), excursions permitted to 15°-30°C (59°-86°F) [See USP Controlled Room Temperature]. PROTECT FROM LIGHT. Keep covered in carton until time of use. FOR SINGLE USE ONLY. DISCARD UNUSED PORTION.

To report SUSPECTED ADVERSE REACTIONS, contact West-Ward Pharmaceutical Corp. at 1-877-845-0689, or the FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

For Product Inquiry call 1-877-845-0689.

Manufactured by:

Phenylephrine Hydrochloride

WEST-WARD
PHARMACEUTICALS
Eatontown, NJ 07724 USA

Revised: May 2011

462-431-01

Phenylephrine Hydrochloride Injection, USP
1% (10 mg/mL)
1 mL Single Dose Vial
NDC 0641-6088-01

Phenylephrine Hydrochloride
Phenylephrine Hydrochloride Injection, USP1% (10 mg/mL)25 x 1 mL Single Dose VialsNDC 0641-6088-25

Phenylephrine Hydrochloride

Phenylephrine Hydrochloride INJECTION

Product Information

Product Type Human prescription drug label Item Code (Source) NDC:0641-6088
Route of Administration INTRAMUSCULAR DEA Schedule

Active Ingredient/Active Moiety

Ingredient Name Basis of Strength Strength
Phenylephrine Hydrochloride PHENYLEPHRINE 10 mg

Inactive Ingredients

Ingredient Name Strength
SODIUM CHLORIDE
SODIUM CITRATE
CITRIC ACID MONOHYDRATE
SODIUM METABISULFITE
SODIUM HYDROXIDE
HYDROCHLORIC ACID
water

Packaging

# Item Code Package Description Marketing Start Date Marketing End Date
1 NDC:0641-6088-01 1 in 1 VIAL
2 NDC:0641-6088-25 25 in 1 CARTON

Marketing Information

Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
1989-01-01


PLEASE, BE CAREFUL!
Be sure to consult your doctor before taking any medication!
Copyright © 2014. drugs-library.com. All rights reserved. Information on drugs-library.com is provided for educational purposes only and is not to be used for medical advice, diagnosis or treatment.
Support info@drugs-library.com.