CHEM-STAR Sensodine 110

DIRECTIONS FOR USE
NOTE: Chem-Star Sensodine 110 requires a Chem-Star II dispenser for proper dilution.
1. Remove drum closure.
2. Insert dispenser pick-up probe fully into container.
3. Chem-Star II dispenser will automatically feed Chem-Star Sensodine 110 at appropriate
use dilution.
4. Consult your Meda Representative for specific use instructions.
Dilution Parameter: A dilute solution of a 1% iodine teat dip will consist of 75% potable
water and 25% Chem-Star Sensodine 110 by volume.
Application of Diluted Chem-Star Sensodine 110
Pre-Milking: Heavily soiled udder and teats should be washed before using a pre-milking teat dip.
Fore-strip teats then dip each teat full length with diluted teat dip solution. Wipe teats dry
after dipping using single-service towels to avoid contamination of milk.
Pre-dip teats with an approved pre-dip.
Post-Milking: Immediately after each milking, dip each teat full length into the diluted teat dip
solution. Allow to air dry. Do not wipe dry. The dip cup solution should be discarded if it
becomes visibly dirty. Do not return any unused solution to original stock container. Do not
turn cows out in freezing weather until teat dip is dry.
PRECAUTION: As with any germicide, irritation or sensitization may occur in sensitive
animals. If irritation occurs, discontinue use; consult your veterinarian if irritation persists.
NOTE: Use blended Chem-Star Sensodine 110 product within one (1) year of blended date.

Principal Display Panel and Representative Label

CHEM-STAR Sensodine 110                  Net Contents: 15 U.S. gal/56.78 L

Premium Iodine Teat Dip Concentrate

An Aid in Reducing the Spread of Organisms
Which May Cause Mastitis